Energy Efficient Lightbulbs, Lighting & other Energy Efficient Products

Air-Source & Ground-Source Heat Pumps make use of the latent ambient temperatures in either the air or the ground and efficiently heat water by a series of heat-transfer processes - supplying domestic hot water, heating swimming pools or for use with underfloor heating systems.
Some pumps offer up to 80% savings on conventional water heating systems & can provide around 200 litres of low cost hot water each day, all year round.

Rainwater can be collected from roofs via traditional guttering, through down pipes to an underground tank. Harvested rainwater can be substituted for purified mains water for many non-drinking uses such as flushing toilets, cleaning and gardening - (allowing you to water your garden even during hose-pipe bans).
Greywater systems - re-using water from baths, showers and wash basins - can also be installed to flush toilets and outdoor uses.
Rainwater Harvesting systems can help you reduce your Mains water consumption by over 50% - saving you money and helping to conserve a key natural resource.

Condensing Boilers: Most old boilers generally only work at 50-60% efficiency and should ideally be replaced by a new, modern, energy efficient condensing boiler (over 90% efficient SEDBUK A rated). A condensing boiler incorporates an extra heat exchanger so that the hot exhaust gases are used to pre-heat the water already within the boiler system. A payback period of between 3-6 years. Systems can be individually tailored to your budget, system requirements and/or size of house/premises.

Cavity Wall & Loft Insulation is an effective but simple way to significantly reduce the amount of energy you need to heat your home - around 35% of all the heat lost in an un-insulated home is lost through the walls and roof. Installing Cavity Wall & Loft Insulation can save the average household approximately between £120 - £200 per year.

Call our Energy Consultants on 0800 804 7191 to discuss Cavity Wall & Loft Insulation and arrange your Free Energy Survey.

Radiator panels save energy and money, with a pay-back period of 6-24 months. Without radiator panels, heat from the radiator escapes through the wall behind it... by fitting them, the wall behind the panel stays cool and the hot air which naturally rises behind the radiator is caused to spin out into the room. This improves heat distribution, reduces heat up time and virtually eliminates cold spots. Fitting is quick & easy with no need to remove radiators.